Hellwig Sway Bar 7227 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Hellwig Sway Bar 7227. Hellwig Sway Bar 7227 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
INSTALLATION INSTRUCTIONS
Rear Stabilizer Bar
Workhorse W20,W22 Models
Thank you for purchasing a quality Hellwig Product.
PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR INSTALLATION
TORQUE TABLE
BOLT SIZE: 3/8 = 20-30 ft. lbs. – 7/16” = 35-45 ft. lbs. – ½” = 50-70 ft. lbs. – 9/16” = 70-90 ft. lbs.
SAFETY: BEFORE STARTING YOUR INSTALLATION, BE SURE TO SET PARKING BRAKE AND CHOCK TIRES.
NOTE: TO EASE INSTALLATION AND TO PROPERLY ADJUST BAR, THE WEIGHT OF THE VEHICLE MUST BE
ON THE SUSPENSION, AS IF DRIVING DOWN THE ROAD. DO NOT RAISE VEHICLE BY FRAME.
7219 (R-7219) 07/08/03
1
1. Remove axle U-bolts. Install U-bolt plate with the mounting tabs towards the inside of the vehicle
andfacing up. Reinstall U-bolts and shock bracket. (see picture 1) Torque to manufacturers recom-
mended specifications.
2. Locate the upper shock mount brackets on the inside of the frame rails and remove the shocks and
shock mount brackets as well as the three nuts for rear crossmember. (see picture 2) Remove self
tapping bolt from drivers side frame rail (fuel filter bolt). Slide driver’s side frame plate behind fuel
filter.
Crossmember mounting bolts
U-Bolt Plate Shock Bracket
2
1
559-734-7451 800-367-5480 FAX 559-734-7460
Vue de la page 0
1 2

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONSRear Stabilizer BarWorkhorse W20,W22 ModelsThank you for purchasing a quality Hellwig Product.PLEASE READ THIS INSTRUCTION SH

Page 2

3. Remove self tapping bolt from drivers side frame rail (fuel filter bolt). Slide driver’s side frame plate behind fuel filter.Reinstall filter and s

Modèles reliés Sway Bar 7219

Commentaires sur ces manuels

Pas de commentaire